|
How To Hang Idealdecor
Murals
1. Materials need to hang your Idealdecor
Wall Mural:
- bucket for mixing the paste 1
brush or roller for applying the
paste
- paper knife for any trimming
- tapestry brush or soft cloth
to press paper flat
- large measuring stick
- packet non-staining wall paper
paste
2. PREPARATION OF THE WALL SURFACE
The wall surface must be dry. Clean
and smooth. Any rough areas must be
smoothed out. All old wallpaper should
be removed and oil-based paints rubbed
down. Hint: You will obtain a perfect
result when working at a room temperature
of 18*-20*C
3. PREPARATION FOR MOUNTING
Lay the Idealdecor Wall Mural out
on the floor in front of the prepared
wall to check that the positions of
the different sheets match. Compare
the size of the wallpaper with the
prepared wall. When measuring the
wall, pencil markings will facilitate
perfect right-angle mounting
4. MOUNTING THE WALL MURAL
Please follow exactly the manufacturer's
instructions when preparing and using
the paste. Spread the lower left sheet
carefully and equally with paste.
Place this sheet on the pre-marked
position and rub over with the tapestry
brush carefully from the middle outwards
until smooth. Any paste which remains
on the front of the picture must be
gently wiped off with a slightly damp
cloth. Overlap all sections by 1/8
inch and finish by trimming any excess.
Hang remaining sheets in the same
manner.
Hanging Woods Trompe
L'Oeil Wall Murals is as Easy as 1*2*3!
Step 1 - Mark the location on the
wall where you would like your mural.
Step 2 - Apply the activator to the
back of your mural.
Step 3 - Place mural on wall.
Step 4 - Sit back and enjoy your
new view!
Step by Step Instructions
for Hanging Environmental Graphics
Wall Murals
Step 1: Mix Paste.
Step 2: Mark wall with vertical and
horizontal lines.
Step 3: Apply paste to panel.
Step 4: Position the panels top to
bottom.
Step 5: Smooth panel with brush.
Step 6: Use a straight edge to trim
to exact dimension.
|